Is elastic sealant recommended for sealing and bonding various types of materials.
POLYMER is recomended for use on :
POLYMER
Type | laminat, steel, wood, concret, plexi, etc. |
Place | Above and below waterline |
Function | sealing bonding |
Chemical character | hybrid |
Densinity | 1,44 g/cm³ |
Curing mechanizm | apsorption of moisture from air |
Elogation at break | to 500% (DIN 53 504) |
Tensile strenght | 3,0 N/mm² (DIN 53 504) |
Tear resistance | 20 N/mm |
Resistant to temperatures | -40ºC to + 90ºC |
Resistant to temperatures for short intervals | to +120ºC (white, black) |
to +100ºC (transparent) | |
Time for skin formation 20ºC | 15 minut |
Curing time 20ºC | 24 h (weld to 3 mm) |
Time to contact with water 20ºC | min. 30 minutes |
Time to be painted 20ºC | 3 day |
Shrink | no |
WHITE 200 ml / code : 8208
BLACK 200 ml / code : 8210
TRANSPARENT 200 ml / code : 8211
Apply on surfaces no need to priming.
Steel surfaces is recommend to prime using Epoxy Anticorrosion primer 4:1 Sea-Line.
Wood and concrete is recommend to prime using Epoxy Woodprimer 10:4 Sea-Line. In case of application on natural wood, its humidity should be lower than 20%.
Clean surfaces from rust, damage paint coatings, etc. To increase adhesion, is recommend to sand surfaces by sand paper :
Clean surfaces from dust and contamination.
Grease and salt remove using Cleaner Sea-Line®
Thanks to advance dispensing system, POLYMER does not require extra tools to application, provides exact thickness of weld during application.
unlock nozzle
unlock dosing regulator
set dosing regulator accordance with the needs
apply product by pressing lever
after finishing application, secure dosing nozzle and block dosing regulator
Le dissolvant silicone est un produit destiné au nettoyage des surfaces avant de mettre la peinture vernis. Les impuretés telles […]
Protéger le système respiratoire Gants en nitrile jetables « MASTER » Gants en nitrile jetables Vêtements de protection Vêtements de protection Coller […]
CALE A PONCER EN LIEGE BLOCK A PONCER AVEC INTERFACE EN MOUSSE CALE A PONCER EN PLASTIQUE FEUILLE DE PROTECTION […]
Le dissolvant silicone est un produit destiné au nettoyage des surfaces avant de mettre la peinture vernis. Les impuretés telles […]
PRODUCT DISCRIPTION : Sea-Line® COLOR RENOVATION COLOR RENOVATION is a product which does not contain silicon and efficiently brings back […]
ESTERAS DE VIDRIO Tapis / Tissu de verre utilisé avec la résine à laminer sert à réparer les trous considérables […]
Il est particulièrement recommandé pour l’amorçage des surfaces en stratifié de verre-polyester et pour la finition des surfaces mastiquées par […]
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
Le produit destiné au remplissage des lacunes et à la liquidation des inégalités résultant des dommages ou des inégalités qui […]
La protection de la surface du bateau contre l’influence destructrice de l’osmose et de la corrosion dans des conditions difficiles
La protection contre l’eau et contre l’influence néfaste des rayons UV
La protection du fond du bateau contre l’encrassement par les algues et contre les coquillages. La protection contre l’eau
Une élimination efficace des fissures, le rafraîchissement de la couleur et du brillant du gel coat ou du vernis
Préparations spéciales pour le nettoyage et la remise en vigueur
Laminage, collage et de remplissage des fissures dans gelcoat
Beaucoup de produits utiles pour les travaux de construction d’un bateau