Langue:

MS POLYMER NEW PRODUCT IN OFFER

Accueil » Nouvelles et promotions » MS POLYMER NEW PRODUCT IN OFFER
Kosmetyki do naprawy łodzi oraz jachtów
MS POLYMER NEW PRODUCT IN OFFER

MS POLYMER NEW PRODUCT IN OFFER

MS POLYMER ist one of the most interesting new product in offer Sea-Line in 2018.
Thanks to advance dispensing system, MS POLYMER does not require extra tools to application, provides exact thickness of weld during application.

Characteristic features of MS POLYMER its resistance to UV and water and salt water), no need to priming and can be covered by any type of paint. MS POLYMER does not discolor surface (does not contain thinners and isocyanate).

MS POLYMER is elastic sealant recommended for sealing and bonding various types of materials, available in colors:

MPS PLYMER NOWOŚĆ


Partager:

Voir aussi
Autres threads de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę