Langue:

HARD ANTIFOULING

Accueil » Produits » Peinture antifouling » HARD ANTIFOULING
Producent farb jachtowych
HARD ANTIFOULING

HARD ANTIFOULING paint:


Use biocides safely. Always read the label and product information before use.

Type GRP laminates, wood, Steel
Place Below waterline
Function Antifouling paint discourages the growth
of barnacles, weed, and other water life on the
submersed hull of the boat.
Application brush, roll, spray gun
Thinning *No recommended
Theoretical coverage For 1l± 10 m2 for
90 μmWFT/ 50 μm DFT
Coats number 1 – 3
 Maximum recommended layer thickness100 μm DFT
Time between layers Min 6 h
Dry to launch: Min 12 h
Pack0,750 l2,5 l
Color **codecode
Black

Red

Dark Blue

8282

8286

8284

8287

8289

8288

* THINNING NOTICE:

In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

** COLOR NOTICE:

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint. Due to the content of copper oxide, a small color difference between the parts of the antifouling paint is acceptable.


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais

Produits connexes

de HARD ANTIFOULING


Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę