Langue:

MULTIFUNCTIONAL 2K SPRAY EPOXY PRIMER

Accueil » Produits » Primaires » MULTIFUNCTIONAL 2K SPRAY EPOXY PRIMER
Producent farb jachtowych
MULTIFUNCTIONAL 2K SPRAY EPOXY PRIMER

EPOXY PRIMER MULTIFUNCTIONAL 2K SPRAY

PRODUCT DISCRIPTION:



BASIC INFORMATION:

SurfacesGRP, laminates, steel, aluminum
AreaAbove and below waterline
FunctionGrounding
Intercoating
Filling
Antiosmotic
Anticorosive
Applicationspray can
Theoretical coverage for 400 ml 1-2 м2
Number of coats2 – 4
Pot life 20°C48 h
Time between layers without sanding5~10 minutes
Color (matt)white
Pack400 ml
Code 38758

APPLICATION INSTRUCTION:

potrzasnij

Before triggering, shake can thoroughly for 2 minutes after agitation balls are heard.

spray 2K - korek

Remove the red pushbutton from the cap.
Turn the can by 180° and fit the pushbutton onto the pin in the base of the can.

spray 2K - wcisnij korek

Turn the can upside down and place on a firm surface.
Press the red pushbutton all the way in with the palm of your hand.

potrzasnijAfter triggering, shake can again thoroughly for 2 minutes after agitation balls are heard.

spray 2K - ustaw dysze

Set the adjustable spray nozzle to the size of the damage and damage pattern.

spray 2K - aplikacja

Spray distance: 10 ~ 20cm.

spray 2K - ilosc warstw

Standard application: approx. 2÷4 spray coats, recommended dry film layer: 80 ~200 μm
NOTICE: For antiosmosis and anticorrosion protection recommended DTF is 240 μm.

spray 2K - czas

Allow a flash-off time of approx. 5-10 minutes between spray coats.

spray 2K - oczysc

After painting, turn the can upside down and spray the valve until empty.

spray 2K - utylizacja

The completely empty spray cans can be disposed of in the recycling waste container.
Cans with hardened material must be disposed of as special waste.

TECHNICAL INFORMATION:


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais

Produits connexes

de MULTIFUNCTIONAL 2K SPRAY EPOXY PRIMER


Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę