Langue:

LA PEINTURE ANTIFOULING ALU PLUS

Accueil » Produits » Peinture antifouling » LA PEINTURE ANTIFOULING ALU PLUS
Sea-Line
LA PEINTURE ANTIFOULING ALU PLUS


Utilisez les biocides avec précaution. Toujours lire l’étiquette et les informations avant de les utiliser.

Type de bateauGRP laminates, wood, Steel, ALUMINIUM
EndroitAu dessous de la ligne de flottaison
FunctionAntifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat.
ApplicationPinceau, rouleau, projection (option)
Dilution *pas recommandé
Rendement théorétique
pour 1l
11-12 m2 pour 100 μmWFT /50 μm DFT
Nombre de couches2 – 3
Temps entre les couches Sans la nécessité de ponçageMin 5h Max 7 days
Dry to launch:Min 12h
Emballage0,750l2,5l
Couleur **:codes:codes:
blanc

blue

Noir

5859

8026

8029

5861

8027

8030

* Remarquez diluant:

Pour les températures élevées et s’il est nécessaire de diluer une pe-inture antimousse, la dilution doit être de 0-5 % au maxi (en volume). L’épaisseur d’une couche de la peinture antimousse dépend de sa dilution et du mode de son application. Veiller particulièrement à obtenir une épaisseur bien définie (100 μm DTF) ce qui contribue à l’efficacité de la peinture antimousse.

** Remarquez la couleur:

La peinture antimousse fraîche exposée à l’air humide peut changer de couleur. Cela ne concerne que la surface et cela ne pénalise pas son efficacité. Après une immersion, sa couleur change légèrement.

Farba-antyporostowa-ALU-PLUS


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę