Lengua:

NEW OFFER! Polishing Past for professionlas

Página web » Noticias y promociones » NEW OFFER! Polishing Past for professionlas
Zabezpieczenie łodzi
NEW OFFER! Polishing Past for professionlas
New in offer product S0 – Brayt Sea-Line is polishing paste designed for professionals – companies producing molds and products where the outer layer of the gel coat or industrial topcoat with a high degree of hardness.
S0 removes defects after sanding grit sandpaper even P800 (depending on the hardness of the surface).
Pasta machine is designed to work. Machining maximum speed of 1800 RPM.
Brayt S0 cooperating with wool applicators, and made ​​of hard sponges. We get a surface gloss.
Pastes BRAYT Sea-Line does not contain silicones or fillers which mask features temporarily. Due to such pastes BRAYT Sea-Line is stable and does not go away after wiping the surface with acetone;)
Package 1kg .

Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę