Lengua:

YACHT VARNISH 1K

Página web » Productos » Capas de acabado » YACHT VARNISH 1K
Farby dla jachtów
YACHT VARNISH 1K


Typewood
PlaceAbove waterline, interior
FunctionHigh gloss
Applicationbrush, roll, spray gun
ThinningThinner for 1 – component primer, varnisch, enamel
Theoretical coverage for 1l12-13 m2 for 80 μm WFT/ 40 μm DFT
Number of coats1 ÷ 3 – renewal old varnish

1 ÷ 5 – new wood, creating new coat

Dry to the touch 20°C:3 h
Dry to rain 20°C:16 h
Fully woterprof24 h
Elapsed time before applying next coat:min. 16 h
Color:transparent
Pack :0,750 l
Code:300008170

Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible

Productos relacionados

de YACHT VARNISH 1K


Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę