Lengua:

MASILLA DE POLIÉSTER PARA MOLDEADO

Página web » Productos » Masillas » MASILLA DE POLIÉSTER PARA MOLDEADO
Kosmetyki do naprawy łodzi oraz jachtów
MASILLA DE POLIÉSTER PARA MOLDEADO


Tipo de embarcaciónlaminado, madera, acero, aluminio
LugarPor debajo de la linea de flotación
FunciónSuperficies grandes,
AplicaciónA mano/ éspatula
Tiempo de trabajo 20°C8÷10 min
Tiempo de secado 20°C30÷40 min
ColorAmarillo
Embalajecódigo
2 kg –

5 kg –

25 kg –

4952

4600

4601

Información técnica:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę