Lengua:

SEAGUARD

Sea-Line
SEAGUARD

Pintura autopulimentable antifouling SEAGUARD no contiene sustancias activas o biocidas tóxicos, lo que es importante sobre todo en el caso de las áreas marinas cerradas.


Tipo de embarcaciónLaminado, madera, acero, aluminio
LugarPor debajo de la linea de flotación
FunciónSe utilizan para proteger el casco contra de la contaminación provocada por las algas y conchas.
Aplicaciónbrocha, rodillo
Diluición *No recomendado
Rendimiento teorético 1l9÷10 m2 para 100 μmWFT/ 50 μm DFT
Número de capas2 – 3
Tiempo entre capas sin necesidad de lijarmin.5 h min
Embalaje0,750l2,5 l
Color **:

blanca

azul

negro

código :

300009843

300009836

300011250

código :

300009847

300009846

300011251

* la nota diluición:

En el caso de altas temperaturas y la necesidad de diluir la pintura antiincrustante, se recomienda una dilución máxima de 0-5% (por volumen). La dilución y el método de aplicación afectan directamente el espesor de la capa de pintura antiincrustante. Se debe prestar especial atención a la obtención de un espesor de recubrimiento específico (100 μm DTF), lo que garantiza el funcionamiento efectivo de la pintura antiincrustante.

** la nota color:

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.

Technical information:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę