Language:

PLASTIC CUPS WITH MEASURE

Home » News and promotions » PLASTIC CUPS WITH MEASURE
Zabezpieczenie łodzi
PLASTIC CUPS WITH MEASURE


We recommend plastic cups with measure. The proportional pattern printed on the cup makes easy to accurately and accurately measure two-component paints and diluents.

Use not only good paints and thinner, but also select the right tools, including graduated cups for painting work, to achieve the best results. Paint accessories have a direct effect on the final finish. We encourage you to meet other Sea-Line accessories and tools you need to do your paint work.


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę