Language:

Złoty Orbital 2006

Home » Awards » Złoty Orbital 2006
Farby antyporostowe

This is the prize awarded by a well-known branch monthly magazine “Rynek Chemiczny” under the auspices of the Ministry of Economy, Labour and Social Policy, Polish Chamber of Chemical Industry and Association of Engineers and Technicians of Chemical Industry.

We were awarded the prize in this contest. The contest committee appreciated the advantages of one of our latest products – surfacer enriched with carbon fibres – MASTER BLACK

Read more: www.rynekchemiczny.com


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę