Language:

Lakiernik

Naprawa łodzi

It is a professional magazine designed for people professionally dealing with car varnishing and tinsmithing and the manufacture and distribution of varnishing materials.It contains information concerning the subject matter of car varnishing and tinsmithing, tools and devices for garage equipment available on the market, varnishing materials, data concerning varnishing and automotive industry and running enterprises.The magazine is distributed by free of charge dispatch by means of constantly updated tele-address base.

The base includes varnishing and tinsmithing garages, varnish mixing houses and authorized service stations, manufacturers and distributors of varnishing materials.

Read more: www.lakiernik.com.pl


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę