Type | GRP laminates, wood, steel, aluminum |
Place | Above waterline |
Function | Large surfaces |
Application | Putty knife |
Pot life 20°C | 8÷10 min |
Hardening time 20°C | 30÷40 min |
Color | yellow |
Pack | code |
2 kg – 5 kg – 25 kg – | 4952 4600 4601 |
Epoxy Filler Universal “NEW” 2:1 PRODUCT DISCRIPTION : Small repair caused by the action of osmosis. Healed minor damage, small […]
Epoxy Filler with fiberglass 2:1 Epoxy Filler with Fiberglass is very durable and can be applied in very thick layers. […]
Gelcoat based on IZO/NPG resin, thanks to which it achieves good resistance to weather conditions and high mechanical properties. Primarily […]
Epoxy filler lightweight 1:1 NEW recommended for large areas due to low own weight PRODUCT DESCRIPTION : low weight and […]
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work