Γλώσσα:

OTHER ACCESORIES

Farby szkutnicze
OTHER ACCESORIES


CORK SANDING BLOCK

Uzupełniające akcesoria lakiernicze klocek korkowySanding block made from natural cork. One side is designed to work as effectively as possible, the other is adapted for convenient handing.


Size: 25 x 60 x 105mm300003446

FOAM SANDING BLOCK

Uzupełniające akcesoria lakiernicze kolcek piankowyFoam sanding block made of four types of material, making it very light and yet has a high internal rigidity and increased strength.

Product has two working surfaces:


Size : 140 x 75 mm300003608
Size : 200 x 75 mm300003609
Size : 290 x 75 mm300003610

PLASTIC SANDING BLOCK

Uzupełniające akcesoria lakiernicze kolcek plastikowyGrinding block with grips for abrasive paper.


Size : 165 x 87 mm300000388
Size : 212 x 105 mm300003154

PROTECTIVE FOIL

Uzupełniające akcesoria lakiernicze folia ochronnaPE-HD protective foil, protects from paint, dust and moisture, necessary during lacquering works.


4 x 5 m UNIWERSALNA300005703
4 x 5 m 0,007 mm300001981

PAPER TOWEL (ROLL)

Uzupełniające akcesoria lakiernicze recznik papierowy rolkaPaper towel roll, white, two-ply, made from pure cellulose – 208 m.


 208m300005703

ANTISTATIC RAGS

Uzupełniające akcesoria lakiernicze sciereczki antystatyczneAntistatic rags, dust-absorbent, to clean the dust and dirt from the surface to be painted. Product allowed  to the aqua and 2K systems. Keep in closed package. Don’t  use on the hot surfaces.


10 szt. – size 40 x 80 cm300003842

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę