Γλώσσα:

Εποξειδικό πληρωτικό ελαφρύ ΝΕΟ

Ιστοσελίδα » Προϊόντα » Εποξειδικά υλικά πάχυνσης » Εποξειδικό πληρωτικό ελαφρύ ΝΕΟ
Farby szkutnicze
Εποξειδικό πληρωτικό ελαφρύ ΝΕΟ

Εποξειδικό πληρωτικό ελαφρύ 1: 1 ΝΕΟ

συνιστάται για μεγάλες περιοχές λόγω χαμηλού βάρους

ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ:


Τύποςελασματοποιημένο, ξύλο, στυλό, αλουμίνιο
Θέσηπάνω και κάτω από την ίσαλο γραμμή
Λειτουργίαμεγάλες περιοχές
Βάρος1l = 700 g
Εφαρμογήμαχαίρι στόκος
χρώμαυπόλευκο
Πακέτοκώδικας
0,750 l

7,5 l

12202

12288


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από Εποξειδικό πληρωτικό ελαφρύ ΝΕΟ


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę