Γλώσσα:

Sea-Line joins trade association ICOMIA

Ιστοσελίδα » Νέα και προσφορές » Sea-Line joins trade association ICOMIA
Sea-Line
Sea-Line joins trade association ICOMIA

We are pround to join ICOMIA as a Sustaining Member.

ICOMIA is the international trade association representing the global marine industry since 1966. ICOMIA brings together marine industry associations from across the world in one global organisation and represents them at international level, presenting a strong and united voice when dealing with issues challenging the industry.

Main reason why we are joining ICOMIA is the fact that the chemical industry where we operate is facing with dynamical changes in regulations of EU and regulations of individual countries. Sometimes directives are contradictory or difficult to interpret. We hope that with the support of the chamber we will be able to keep up with them and be ahead of them enough to offer our customers a safe and sustainable product. We are looking forward to synergy of community of yachting paints and chemicals producers.

http://www.icomia.org/


Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę