Γλώσσα:

Αντιοσμωτικό HS εποξειδικό αστάρι 3:2

Ιστοσελίδα » Προϊόντα » Στρωτήρες » Αντιοσμωτικό HS εποξειδικό αστάρι 3:2
Zabezpieczenie łodzi
Αντιοσμωτικό HS εποξειδικό αστάρι 3:2


τύποςΕλάσματα GRP, ξύλο , αλουμίνιο
θέσηΠάνω και κάτω από την ίσαλο γραμμή
ΛειτουργίαΓέμισμα Αντιοσμωτική
Εφαρμογήπινέλο, ρολό, πιστόλι βαφής
ΔιαλυτικόΔεν συνιστάται
Θεωρητική καλυπτική ικανότητα για 1 l6-7 m2 για
150 μm WFT/
150 μm DFT
Αριθμός στρώσεων1 – 4
Χρόνος διάρκειας μείγματος σε 20°C0, 45 h
Χρόνος αναχρωματισμού μεταξύ στρώσεων χωρίς τρίψιμο8 h – 72 h
ΧρώμαΣκούρο γκρι
Συσκευασίαcode
0,750l –
7,5l –
5075
5149

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από Αντιοσμωτικό HS εποξειδικό αστάρι 3:2


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę