Γλώσσα:

NEW OFFER! Polishing Past for professionlas

Ιστοσελίδα » Νέα και προσφορές » NEW OFFER! Polishing Past for professionlas
Zabezpieczenie łodzi
NEW OFFER! Polishing Past for professionlas
New in offer product S0 – Brayt Sea-Line is polishing paste designed for professionals – companies producing molds and products where the outer layer of the gel coat or industrial topcoat with a high degree of hardness.
S0 removes defects after sanding grit sandpaper even P800 (depending on the hardness of the surface).
Pasta machine is designed to work. Machining maximum speed of 1800 RPM.
Brayt S0 cooperating with wool applicators, and made ​​of hard sponges. We get a surface gloss.
Pastes BRAYT Sea-Line does not contain silicones or fillers which mask features temporarily. Due to such pastes BRAYT Sea-Line is stable and does not go away after wiping the surface with acetone;)
Package 1kg .

Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę