Γλώσσα:

NEW POLISHING PRODUCT SEA-LINE

Ιστοσελίδα » Νέα και προσφορές » NEW POLISHING PRODUCT SEA-LINE
Farby antyporostowe
NEW POLISHING PRODUCT SEA-LINE

NEW POLISHING PRODUCT SEA-LINE

s05 ikona

S05 ONE STEP HEAVY CUT & GLOSS. Polishing compound has a paste texture and is a one-stage compound with a high cutting force which guarantees quick removal of defects and grinding scratches from a surface after treatment with sandpaper.

You can learn more about it on our website

s1 premium ikona

S1 PREMIUM ONE STEP CUT & HIGH GLOSS Polishing compound of liquid consistency, guarantees obtaining a very high gloss on the surface in one-stage polishing process.

You can learn more about it on our website


Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I degrease surfaces with acetone?

We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę