Γλώσσα:

Πολυουρεθάνη υψηλής στιλπνότητας άχρωο χρώμα– βερνίκι

Ιστοσελίδα » Προϊόντα » Τελικά χρώματα Topcoats » Πολυουρεθάνη υψηλής στιλπνότητας άχρωο χρώμα– βερνίκι
Sea Line farby jachtowe
Πολυουρεθάνη υψηλής στιλπνότητας άχρωο χρώμα– βερνίκι


τύποςΕλάσματα GRP,ξύλο
θέσηΠάνω και κάτω από την ίσαλο γραμμή
ΛειτουργίαΤελικό χρώμα χωρίς διαλυτικό η αστάρι με διαλυτικό
Εφαρμογήπινέλο, ρολό, πιστόλι βαφής
ΔιαλυτικόΕπιλογή:διαλυτικό PU για ρολο/βούρτσα η διαλυτικό PU για σπρει
Θεωρητική καλυπτική ικανότητα για 1 l12÷13 m2 για 80 μm WFT/ 39 μm DFT
Αριθμός στρώσεων2 – 4
Χρόνος διάρκειας μείγματος σε 20°C3 h
Χρόνος αναχρωματισμού μεταξύ στρώσεων χωρίς τρίψιμοmin 20 λεπτό
Χρώμαδιαφανές
Συσκευασία0,750 l15 l
code67497506

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę