Γλώσσα:

GELCOAT FILLER “DRY FAST”

Zabezpieczenie łodzi
GELCOAT FILLER “DRY FAST”

PRODUCT DISCRIPTION :

NEW Gelcoat Filler is very fast hard and easy in use.


BASIC INFORMATION :

TypeGRP Laminates
PlaceAbove waterline
FunctionScratches and small repairs
Pot life 20°C6÷7 min
Hardening time 20°C4 h

PACKAGING:

CODE:

250g

100g

APPLICATION METHODS:

Manually:

Technical information:

GELCOAT FILLER „DRY FAST” (styrene free):


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από GELCOAT FILLER “DRY FAST”


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę