Γλώσσα:

Πολυουρεθάνη τελικά χρώματα topcoat

Ιστοσελίδα » Προϊόντα » Τελικά χρώματα Topcoats » Πολυουρεθάνη τελικά χρώματα topcoat
Producent farb jachtowych
Πολυουρεθάνη τελικά χρώματα topcoat

τελικά χρώματα topcoat yacht paint Πολυουρεθάνης συνιστώνται κυρίως πάνω από την ίσαλο γραμμή


τύπος Ελάσματα GRP,ξύλο, χάλυβας , αλουμίνιο
θέση Πάνω από την ίσαλο γραμμή
Λειτουργία Υψηλής γυαλάδας τελικό χρώμα
Εφαρμογή πινέλο, ρολό, πιστόλι βαφής
Διαλυτικό Επιλογή:διαλυτικό PU για ρολο/βούρτσα
Θεωρητική καλυπτική ικανότητα για 1 l 13-14 m2 για

75 μmWFT/ 40 μm DFT

Αριθμός στρώσεων 2 – 3
Χρόνος διάρκειας μείγματος σε 20°C 3 h
Χρόνος αναχρωματισμού μεταξύ στρώσεων χωρίς τρίψιμο 30 λεπτό
Συσκευασία 0,750l     ή   15 l
Χρώμαcode
Ασπρο –White56536222
Εκρού –Light ivory56577727
Κόκκινο –Ruby red5656X
βαθυγάλαζος –Sapphire blue56557779
Μπλέ –Sky blue81638162
Πράσινο –Mint green7322X
Γκρι –Squirrel grey74387439
Μαύρο –Jet black62627994

ROLLER / BRUSH



SPRAY



During paint job is recommend to use products from one batch

Farba-poliuretanowa


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από Πολυουρεθάνη τελικά χρώματα topcoat


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę